Customize Your Traditional Vehicle - Paint Your Own Rims

While, the concept of painting your personal rims has been about a couple of years now, several questions pop up of how to do it and I believed I would share my own experiences with painting my Integra stock rims. I have read up numerous examples of how to do this, but my 1st time trying was this year when I chose to refinish my winter rims. I was rather please with the ou...

Paint your personal Rims? Who would have believed some thing previously accomplished by professionals could be completed in your own home.

Even though, the concept of painting your personal rims has been about a few years now, numerous inquiries pop up of how to do it and I believed I would share my own experiences with painting my Integra stock rims. I have read up a lot of examples of how to do this, but my initial time trying was this year when I chose to refinish my winter rims. I was fairly please with the outcome.

Very first, what the hell do you want to paint your rims? Paint of course :) This is exactly where Duplicolor comes in with their wheel paint. They supply paint colors to match your style coming in white, gunmetal, classic silver and bronze as properly. I chose to do mine in gunmetal leaving my lip the stock polished style look. So here are your possibilities:

So you chose your color, purchased your paint and are semi-prepared. First, you require to sand down your rims. Why? This gives the surface a rough texture so the paint has anything to adhere to. Reference the article to polish your rims on how sanding of the rims works. The only difference with this is how far you want to go. In my case, getting winter rims painted I chose not to go by way of the approach of stripping the paint on the rims completely. For supplementary information, consider having a gander at: here. I basically sanded down the surface with 300 grit sandpaper ensuring to make every little thing sanded equally. This offers the rough surface essential for the paint to adhere, and as extended as your rims had no damage it must be great sufficient.

Your rims are sanded you have your paint and now are prepared. Very first, make confident you clean all sanding dust off the rims and make sure a totally clean surface so the paint will stick and not flake off following your 1st drive out with your newly painted rims!!! Here are my rims washed and prepared to fully dry before painting:

My rims are masked off with newspaper and masking tape. Of course you want to do this so you dont turn your tires into the color you are painting. I don't want gunmetal painted tires. Going To powder coating rims cost certainly provides aids you can tell your mother. Also if you appear close sufficient, you will know that the lip has been masked off as nicely. So I cautiously applied the masking tape on the lip to safeguard it from being painted as properly. Also, you know the small thing you pump your air into, mask that off as well unless you want that to have a color adjust as nicely :)

The rims are dry, you have masked off what you dont want painted and now you are prepared. Put some newspaper on the ground and place the rim on top of the newspaper. You do not want to paint the concrete underneath the rim so hold it clean with the newspaper.

Now apply your initial coat of paint. Let the paint dry properly and next day admire your handiwork and final results..Pro-Strip 958 W. 1st Ave. Mesa, AZ 85210 (480)-380-0489